Machine & technology
The geared-head spindle provides increased torque for heavy cuts, still keeping the ability to run at high rpm for high speed machining.
The BT50 is standard for the spindle.
Technology & Options
|
There are two optional gear boxes. The integrated gear box has an oil-cooling system circulates oil to all vital areas inside the gear box. The ZF gear box is also possible BT50 up to 8000RPM. |
End Mill Tool: 50 mm Feed-Rate: 150 mm/min Depth of Cut: 48 mm Spindle Speed: 500 rpm Travel: 360 CC/min Material: S45C |
Face Cutter Tool: 100 mm Feed-Rate: 880 mm/min Width of Cut: 100 mm Depth of Cut: 5.7 mm Spindle Speed: 400 rpm Travel: 500 CC/min |
Armless ATC |
Laser calibration |
Ball bar test |
Heat exchanger |
Arm type ATC |
Coolant ThroughSpindle(CTS) |
Spindle oil coolingsystem |
3D touch probe |
Tool length pre-setter(Mechanical) |
3D Tool pre-setter(Mechanical) |
Five axis tables(100mm-500mm) |
Air Conditionerfor Electrical Cabinet |
3D touch probe |
Coolant particles filter (10um) for CTS |
Floor Plans