vmaxmachinery

You are here: Products Double Colume Machining Centers DMC-9120
Thursday, 17 April 2014 08:02 administrator
E-mail Print PDF

TRAVEL:
X-axis: 1200 mm (47.2")
Y-axis: 900 mm (35.4")
Z-axis: 550 mm (21.7")

Description UNIT DMC-9120
TRAVEL
X-axis MM( inch ) 1200 (47.2)
Y-axis MM( inch ) 900 (35.4)
Z-axis MM( inch ) 550 (21.6)
Z-axis(O.P.) MM( inch ) 670 (26.4)
Spindle nose to table surface MM( inch ) 100~770
(3.9~30.3)
Distance between columns MM( inch ) 1000 (39)
TABLE
Dimension MM( inch ) 1033 * 900
(51.2 * 35.4)
Working Area MM( inch ) 1150 * 850
(45.3 * 33.4)
Tee Slots ( W x No. x CD) MM 18 x 7 x 100
Max. Table Load KG( lbs ) 1500 (3300)
Spindle
Spindle speed(Built-in type) rpm 18000/20000(O.P.)
Spindle motor(Built-in type)
Torque Max.		 kw / NM 18kw / 80NM
Spindle Taper HSK 63A
Spindle speed(Direct drive) rpm BT40: 12,000/15,000
BT50: 8,000/10,000/12,000(O.P.)
Dual-speed spindle motor
Kw-Nm(L/H) (Direct drive)		 Controller
Kw/Nm
    Faunc-
  • αT8 7.5kw-15,000rpm L:47NM  H:23.9NM
  • αT15 18.5kw-12,000rpm           L:102NM  H:28.6NM
  • αL15 18.5kw-15,000rpm            L:150NM  H:35NM
  • αL26(18.5-22kw)10,000rpm             L:286NM  H:88NM
  • αB160LL(30kw)10,000rpm              L:350NM  H:95NM
  • αL8 (11-15kw)20,000rpm             L:79.5NM  H:23.9NM
    Mitsubishi-
  • SJ-VKRS30-06ZM
    22kw-10,000rpm
    L:286NM  H:88NM
    Siemens-
  • 1PM6138-2LF8
    22kw-10,000rpm
    L:140NM  H:53NM
α22+ZF Gear Box α30+ZF(Direct drive) (1:4) (Direct Drive) H:8,000rpm L:1,500rpm/560NM(Max)
(After mounting gear box, the torque increase 4 times at low speed)
H:8,000rpm/L:700rpm/1100NM
SJ-V26+ZF Gear box(Direct drive) (1:4) (Direct Drive) H:8,000rpm L:1,500rpm/560NM(Max)
(After mounting gear box, the torque increase 4 times at low speed)
H:8,000rpm/L:700rpm/1100NM
Spindle Taper(o.p.) BT40/DIN69871
BT50/DIN69871(O.P.)
Feedrate
Cutting feed mm 1-10,000
Depending on controller
X/Y axis rapid traverse(o.p.) mm 30,000
Z axis rapid traverse(o.p.) mm 15,000
X axis servo motor
Y/Z axis servo motor		 NM 22
22/30
Linear guide (Roller type)
X/Y/Z axis mm X: 35*2pcs
Y: 35*2pcs + 25*1pcs
Z: 45*2pcs
Ballscrew
X axis ballscrew dia x pitch mm 45 * 12
Y axis ballscrew dia x pitch mm 45 * 12
Z axis ballscrew dia x pitch 45 * 10
A.T.C
Type of tool(HSK63A/BT40)
Tool capacity		 Armless Armless type
12(O.P.)16/20
Type of tool(BT40/BT50)
Tool capacity		 Arm Arm
24/30 (Disc type)
32/40/60/80/120(Chain type)
Max. tool diameter MM( inch ) 76(3")
Max. tool length MM( inch ) 250(9.8")
Max. tool weight kgs( lbs ) 6(13.2")
Tool to tool time sec. Armless Type:7
Air supply kg/c㎡ 6
Power supply KVA 35
Coolant pump HP 1HP * 2pcs
Machine weight kgs(lbs) 11,500/25,300
Raiser block 200mm(o.p.) mm 310~865
Raiser block 500mm(o.p.) mm 610~1165

Controller